EIT SERIES
DESCRIPTION
The recessed control unit EIT is an electronic device for controlling pneumatic cleaning of the Industrial Dust Collector Systems.
The pressure transducer mounted on the unit measures the differential pressure, allowing an accurate analysis of the filter clogging status.
The control unit has 2 relay contacts, to signal alarm events, a 4-20mA self-powered output, useful for transmitting the pressure value read to a remote device, and a large graphical LCD, which displays the operating status and, through a membrane keypad, allows configuration of the general parameters.
FEATURES
Power Supply Voltage:
Power Supply Voltage Upon Request:
Ouput Voltage for Solenoid Valves:
Inputs:
Solenoid Valves Output Channels:
Active Output 4-20ma
Electric Consumption:
Alarm Relays:
Maximum Load:
Differential pressure switch
Screen:
5 x 20 mm glass fuse:
Operating Temperature:
Storage Temperature:
Valves opening impulse time:
Interval pause time between valve openings:
Built-In Casing:
Protection Rating From Water and Dust:
115-230 V ± 10% 50-60 Hz
24 Vac ± 10 % , 24 Vdc ± 10 %
115 Vac 50-60 Hz , 230 Vac 50-60 Hz , 24 Vac , 24 Vdc
Remote Enabling Consent Switch / Post-Cleaning Cycles
4 ÷ 16
Proportional to the dP reading for remote consultation of pressure
28 Watt at maximum load
2 normally closed
3A @ 250Vac / 2A @ 24Vdc, 24 Vac
0 ÷ 4 kPa (0 ÷ 10 kPa)
Multilingual alphanumerical LCD display 128 x 64px
1AT @ 115-230 Vac , 3AT @ 24 Vac/24 Vdc
From -10 °C to 55 °C
From -20 °C to 60 °C
50 m.sec. ÷ 5 sec.
1 sec. ÷ 999 sec.
Die-Cast Aluminium 144 x 144 mm
IP65 DIN EN 60529
(With PVC cover on front panel)
DATA SHEET
©Turbo S.r.l. 2024 | Via Felice Cavallotti, 15 – 20122, Milano – MI | Partita Iva IT02765350968 | Privacy | Whistleblowing